Brother Sabf6200d1 Bf3 Continuous Hoop Border Frame 12x4 for Xv8500d Quattro Q3 Nv6750d

Follow the steps below:

Selecting a Pattern

1.  Select and select a pattern.

2.  Combine the patterns and use the border function to repeat the pattern.

3.  Press .

4.  From the embroidery frame display settings, select one of the embroidery frame displays for the border embroidery frame.

* Of the 14 settings available, there are two for border embroidery frames.

(1) Border embroidery frame embroidering area (18 cm 10 cm)

(2) Center line

5.  If necessary, add the thread mark. Since the pattern will be repeatedly embroidered from the top to the bottom, add the thread mark at the lower center of the pattern. When you are finished, press .

→ Touch and , or and to highlight the design for inserting thread marks.

NOTE:

Do not add thread marks to character patterns.

Add the thread mark to patterns that do not have a point of alignment, such as rotated patterns or patterns that are spaced apart. Patterns that can be aligned visually can be embroidered cleanly without the thread mark.

Select the location where the thread mark is to be added according to the direction that the embroidery is repeated.

If the design direction is rotated, use the following suggestions.

(1) First Pattern

(2) Second Pattern

(3) Thread mark

6.  Press .

Hooping the Fabric in the Border Embroidery Frame

1.   With a chalk pen, mark the fabric with a line drawn down the center of the area to be embroidered.

(1) Pattern

(2) Mark (line)

2.  Affix stabilizer material to the fabric to be embroidered.

NOTE:  When embroidering the edges of the fabric, affix stabilizer material larger than the fabric, and then firmly secure the fabric and excess part of the stabilizer material within the border embroidery frame (in the same way as when the normal embroidery frame is used). Otherwise, misaligned patterns may result.

(1) Fabric

(2) Stabilizer

3.  If the upper frame is locked down against the lower frame, press the left and right lock release buttons to unlock the upper frame.

(1) Lock release buttons

4.  Lay the fabric between the upper and lower frames.

5.  Place the embroidery sheet in the upper frame, align the guide line on the embroidery sheet with the mark (line) on the fabric, and then press down on the left and right locking levers until they click into place.

(1) Locking levers

NOTE:   The fabric can also be positioned in the border embroidery frame by aligning the edge of the fabric with the inner markings on the upper frame.

NOTE:   If there is excess fabric after the center of the embroidering area is aligned with the center of the border embroidery frame, fold over the excess fabric, place it on top of the upper frame, and then press down on the levers. Be careful that the folded excess fabric is not caught in the embroidering area.

6.  Remove the embroidery sheet, and then pull the four sides of the fabric to remove any slack. Finally, check that the fabric is firmly stretched.

Attaching the Border Embroidery Frame to the Embroidery Unit

CAUTION:

After firmly hooping the fabric in the border embroidery frame, attach the frame to the embroidery unit. Otherwise, the needle may break and cause injuries.

Before attaching the border embroidery frame to the embroidery unit, make sure that the needle and presser foot have been raised. Otherwise, the needle may break and cause injuries.

NOTE:   Before attaching the border embroidery frame, wind the bobbin with thread and install it.

1.   Make sure that the needle and presser foot have been raised. If the needle has not been raised, press the 'Needle Position' button to raise it. If the presser foot has not been raised, press the 'Presser Foot Lifter' button to raise it.

2.   Make sure that the embroidery unit carriage has moved to its initial position.

3.   Align the guide on the border embroidery frame with the right edge of the embroidery frame holder.

(1) Embroidery frame holder

(2) Guide on border embroidery frame

4.  Slide the border embroidery frame into the embroidery frame holder, making sure to align the border embroidery frame's arrow mark () with the embroidery frame holder's arrow mark ().

(1) Arrow marks

5.  Lower the frame-securing lever so that it is level with the border embroidery frame to secure the border embroidery frame in the embroidery frame holder.

(1) Frame-securing lever

CAUTION:   If the frame-securing lever is not lowered, the pattern may not embroider correctly or the presser foot may strike the border embroidery frame and cause injuries.

Embroidering the First Pattern

NOTE:   When the border embroidery frame is used, the embroidering time may be slightly longer than the time that appears in the screen, depending on the type of fabric and pattern that is used.

1.  To check the embroidering area, press .

2.  Thread the machine, and then start embroidering.

CAUTION:   Do not touch the border embroidery frame while embroidering.

When embroidering is finished, the thread mark is sewn with the last thread color.

 Removing the Border Embroidery Frame

NOTE: Before removing the border embroidery frame from the embroidery unit, make sure that the embroidery unit carriage has moved to its initial position.

1.   Raise the frame-securing lever and pull the border embroidery frame toward you.

CAUTION:

If the thread has become tangled and the embroidery unit carriage does not move to its initial position, even after the thread is cut, turn off the machine, manually move the carriage, and then remove the border embroidery frame.

Only move the embroidery unit carriage when the machine is turned off.

Embroidering the Next Pattern

1.   Press both lock release buttons and slide the fabric to align the embroidering area of the next pattern, and rehoop the fabric in the border embroidery frame.

NOTE: Adjust the position of the fabric so that the embroidering area for the next pattern is within the embroidering area of the embroidery sheet.

(1)  Pattern embroidered first

(2)  Position of pattern to be embroidered next

(3)  Embroidering area of embroidery sheet

2.  Attach the border embroidery frame to the embroidery unit, and then press .

3.  Use to select the needle position that will align with the thread mark at the end of previous embroidery. For this example, align the needle position with the upper center of the next pattern.  When you are finished, press .

4.  Use to align the needle position with the point of the thread mark.

(1)  Needle position

NOTE:   After turning the handwheel to check the needle position, press the 'Needle Position' button to raise the needle.

5.  After aligning the needle position for the beginning of embroidering, remove the thread mark.

NOTE:   Remove the thread mark before starting to embroider. Otherwise, the thread mark stitching may be combined with the pattern stitching and become difficult to remove.

6.  Embroider the next pattern. To continue embroidering a repeating pattern, repeat the procedure starting with Removing the Border Embroidery Frame.

CAUTION: If the sewing machine is turned off, then turned on again with the border embroidery frame attached or if you try to select a stitch from the Utility Stitch screen or the Character/Decorative Stitch screen while the border embroidery frame is attached, the following message appears. If the border embroidery frame is not fully removed from the embroidery unit at this time, the border embroidery frame may be hit by the presser foot when the carriage of the embroidery unit is moved. When the following message appears, fully remove the border embroidery frame.

chamberssommainly76.blogspot.com

Source: https://help.brother-usa.com/app/answers/detail/a_id/71560/~/how-do-i-use-the-border-frame%3F

Share this post